High Strength Epoxy Gel for Anchoring and Doweling

DURAL HS GEL is a two component, 1:1 mix ratio, structural epoxy system that offers exceptional strength in anchoring and doweling applications and can be installed from 40°F to 110°F (4°C to 43°C). DURAL HS GEL has been tested in accordance with ASTM E488 and ASTM E1512 for its ability to resist static, dynamic, seismic, and wind loads in uncracked concrete for both threaded rod and rebar.

Features & Benefits

  • Moisture insensitive - allowing installation and curing in damp environments
  • Withstands freeze-thaw conditions
  • Little to no odor
  • High modulus
  • Service temperature range between 35°F (2°C) and 180°F (82°C)
  • DOT Not Regulated (non-corrosive)


  • Anchoring threaded rods, bolts, and rebar dowels into uncracked concrete
  • Short and long term tensile anchoring
  • Grouting dowel bars and tie bars
  • Bonding agent for fresh to hardened concrete, and hardened to hardened concrete

Specifications / Compliances

  • ASTM C881-14 Types I, II, IV, and V, Grade 3, Classes A, B, and C
  • Meets the requirements of AASHTO 235
  • U.S. DOT Not Regulated (Non-Corrosive)


DURAL HS GEL is packaged in cases of 21.2 oz (627 mL) cartridges (12 cartridges per case). Cases of 53 oz (1.6 L) cartridges (6 cartridges per case) are available on a made to order (MTO) basis, and may be subject to minimum order quantities. The mix ratio is 1:1 by volume.