PSI Fiberstrand 100
PSI FIBERSTRAND 100 is a monofilament polypropylene micro-fiber for concrete reinforcement that complies with ASTM C 1116, Standard Specification for Fiber Reinforced Concrete and Shotcrete, and is specifically designed to help mitigate the formation of plastic shrinkage cracking in concrete. Typically used at a dosage rate of 1.0 lb/yd
³ (0.6 kg/m ³), PSI FIBERSTRAND 100 micro-fibers have been shown to greatly reduce plastic shrinkage cracking when compared to plain concrete. PSI FIBERSTRAND 100 micro-fibers also comply with applicable portions of the International Code Council (ICC) Acceptance Criteria AC32 for synthetic fibers.
Controls and mitigates plastic shrinkage cracking
Reduces segregation, plastic settlement and bleed-water
Provides three-dimensional reinforcement against micro-cracking
Increases surface durability, impact and abrasion resistance
Reduction of in-place cost versus wire mesh for non-structural temperature / shrinkage crack control
Easily added to concrete mixture at any time prior to placement
UL certified for series D700 and D800 metal deck assemblies as alternate to wwF - CBxq.R13773
Slabs on grade, sidewalks, driveways, curb work, overlays and toppings
Footings, foundations, walls and tank applications
Stucco applications, pre-cast concrete and pre-stressed beams
Shotcrete, slope paving and composite steel deck construction
PSI FIBERSTRAND 100 micro-fibers are packaged in 1.0 lb (0.45 kg), 1.5 lb (0.68 kg), 5.0 lb (2.27 kg) and 7.5 lb (3.4 kg) water soluble bags. Additional and special packaging configurations, including bulk, are also available upon request.